Glass Pebble Magnet Tutorial

Glass Pebble Magnet Tutorial from StampinFool.com

Glass Pebble Magnet Tutorial – Craft Fair Special

The most common question I get asked at a craft fair is how to make my adorable Glass Pebble Magnets. It’s the most searched post on my blog over at StampinFool.com and I understand why.
It is especially relevant for those of you vending craft fairs. These magnets sell great and are quick and easy to make in large quantities. Again, they sell GREAT! Priced at a dollar a piece, you are bound to sell out at each event!

The cost of producing them is relatively inexpensive and the time required to make them is nominal. It’s the perfect balance of time, money and return on investment for a craft fair item for anyone- a beginner or seasoned vendor, because they appeal to a large market and you can churn them out quickly. Also, because they are not expensive for purchasers (I price them at $1), all shoppers will be likely to buy them- young girls for their classmates or best friends, moms, and grandmas. These glass pebble magnets are the perfect edition to your craft fair inventory or to your refrigerator.

Let’s get started.

Glass Pebble Magnet Tutorial from StampinFool.com

Get the supplies here: 

 

Supplies:
  • 1” circle punch
  • Patterned Paper
  • Hot glue gun
  • Glue sticks
  • High energyCeramic Industrial Magnets
  • Silicone craft sheet {Hot glue won’t stick to this and it makes for easy glueing}


Instructions:

1.  Punch 1” circles out of your favorite Designer Series Patterned Paper. I use exclusively Stampin’ Up! products because the quality stands the test of time (years).

glass pebble magnets @ StampinFool.com

2.  Put a small dot of Diamond Glaze on the paper and firmly press the glass pebble on top. (I was surprised at how little you need for it to spread out and cover the entire circle.) crystal effects
glass pebble magnets @ StampinFool.com

3.  Allow Diamond Glaze to dry. I does not take more than a minute- by the time you finish the last one, the first ones should be dry.

4.  Turn over pebbles and hot glue magnets on the back of the pebble. glass pebble magnets @ StampinFool.com

5.  Enjoy the finished magnets!! 

Glass Pebble Magnet tutorial from StampinFool.com

 

And, here is a bonus photo tutorial recap for you for easy reference. Glass Pebble Magnet Tutorial from StampinFool.com

Supply List

 

I hope you found this tutorial helpful and simple to follow. I really enjoy making these magnets and I know you will too.

I will leave you with a few tips on pricing as well as storage.
I store the completed magnets on cookie trays as they are magnetic and I can move the magnets around as they sell. The benefit of the trays is that they lay flat for long term storage but you can still prop them upright and the magnets do not fall off while you are selling them. I priced them at $1 for selling at craft fairs.
Here is the cost breakdown:
– Magnets $7 for 50
– Mini glue gun $2
– Glue sticks $2
– Diamond Glaze ($7, but i already had this)
– Stampin’ Up!’s Petal Garden Patterned Paper – $10 for 48 sheets
– Pebbles $2 for 60ish (two bags)

So, that comes to roughly $30 (assuming you didn’t have any of the materials) divided by 50 pieces (# of magnets in pack), equals $0.60 per piece. Sold at a dollar a piece that’s almost double the profit on each magnet sold. And next time you make them, the only materials cost you will have will be the magnets and pebbles, making the profit margin even higher. This is a great product guaranteed to sell out.

Glass Pebble Magenet tutorial by StampinFool.com

SaveSave

SaveSave

Glass Pebble Magnet Tutorial

Glass Pebble Magnet Tutorial from StampinFool.com

Glass Pebble Magnet Tutorial – Craft Fair Special

The most common question I get asked at a craft fair is how to make my adorable Glass Pebble Magnets. It’s the most searched post on my blog over at StampinFool.com and I understand why.
It is especially relevant for those of you vending craft fairs. These magnets sell great and are quick and easy to make in large quantities. Again, they sell GREAT! Priced at a dollar a piece, you are bound to sell out at each event!

The cost of producing them is relatively inexpensive and the time required to make them is nominal. It’s the perfect balance of time, money and return on investment for a craft fair item for anyone- a beginner or seasoned vendor, because they appeal to a large market and you can churn them out quickly. Also, because they are not expensive for purchasers (I price them at $1), all shoppers will be likely to buy them- young girls for their classmates or best friends, moms, and grandmas. These glass pebble magnets are the perfect edition to your craft fair inventory or to your refrigerator.

Let’s get started.

Glass Pebble Magnet Tutorial from StampinFool.com

Get the supplies here: 

 

Supplies:
  • 1” circle punch
  • Patterned Paper
  • Hot glue gun
  • Glue sticks
  • High energyCeramic Industrial Magnets
  • Silicone craft sheet {Hot glue won’t stick to this and it makes for easy glueing}


Instructions:

1.  Punch 1” circles out of your favorite Designer Series Patterned Paper. I use exclusively Stampin’ Up! products because the quality stands the test of time (years).

glass pebble magnets @ StampinFool.com

2.  Put a small dot of Diamond Glaze on the paper and firmly press the glass pebble on top. (I was surprised at how little you need for it to spread out and cover the entire circle.) crystal effects
glass pebble magnets @ StampinFool.com

3.  Allow Diamond Glaze to dry. I does not take more than a minute- by the time you finish the last one, the first ones should be dry.

4.  Turn over pebbles and hot glue magnets on the back of the pebble. glass pebble magnets @ StampinFool.com

5.  Enjoy the finished magnets!! 

Glass Pebble Magnet tutorial from StampinFool.com

 

And, here is a bonus photo tutorial recap for you for easy reference. Glass Pebble Magnet Tutorial from StampinFool.com

Supply List

 

I hope you found this tutorial helpful and simple to follow. I really enjoy making these magnets and I know you will too.

I will leave you with a few tips on pricing as well as storage.
I store the completed magnets on cookie trays as they are magnetic and I can move the magnets around as they sell. The benefit of the trays is that they lay flat for long term storage but you can still prop them upright and the magnets do not fall off while you are selling them. I priced them at $1 for selling at craft fairs.
Here is the cost breakdown:
– Magnets $7 for 50
– Mini glue gun $2
– Glue sticks $2
– Diamond Glaze ($7, but i already had this)
– Stampin’ Up!’s Petal Garden Patterned Paper – $10 for 48 sheets
– Pebbles $2 for 60ish (two bags)

So, that comes to roughly $30 (assuming you didn’t have any of the materials) divided by 50 pieces (# of magnets in pack), equals $0.60 per piece. Sold at a dollar a piece that’s almost double the profit on each magnet sold. And next time you make them, the only materials cost you will have will be the magnets and pebbles, making the profit margin even higher. This is a great product guaranteed to sell out.

Glass Pebble Magenet tutorial by StampinFool.com

SaveSave

SaveSave

Glass Pebble Magnet Tutorial

Amazon Prime Day

Welcome! It’s Amazon Prime Day today!!! Don’t miss out on the best deals!!

 

Glass Pebble Magnet Tutorial from StampinFool.com

Glass Pebble Magnet Tutorial – Craft Fair Special

The most common question I get asked at a craft fair is how to make my adorable Glass Pebble Magnets. It’s the most searched post on my blog over at StampinFool.com and I understand why.
It is especially relevant for those of you vending craft fairs. These magnets sell great and are quick and easy to make in large quantities. Again, they sell GREAT! Priced at a dollar a piece, you are bound to sell out at each event!

The cost of producing them is relatively inexpensive and the time required to make them is nominal. It’s the perfect balance of time, money and return on investment for a craft fair item for anyone- a beginner or seasoned vendor, because they appeal to a large market and you can churn them out quickly. Also, because they are not expensive for purchasers (I price them at $1), all shoppers will be likely to buy them- young girls for their classmates or best friends, moms, and grandmas. These glass pebble magnets are the perfect edition to your craft fair inventory or to your refrigerator.

Let’s get started.

Glass Pebble Magnet Tutorial from StampinFool.com

Get the supplies here: 

 

Supplies:
  • 1” circle punch
  • Patterned Paper
  • Hot glue gun
  • Glue sticks
  • High energyCeramic Industrial Magnets
  • Silicone craft sheet {Hot glue won’t stick to this and it makes for easy glueing}


Instructions:

1.  Punch 1” circles out of your favorite Designer Series Patterned Paper. I use exclusively Stampin’ Up! products because the quality stands the test of time (years).

glass pebble magnets @ StampinFool.com

2.  Put a small dot of Diamond Glaze on the paper and firmly press the glass pebble on top. (I was surprised at how little you need for it to spread out and cover the entire circle.) crystal effects
glass pebble magnets @ StampinFool.com

3.  Allow Diamond Glaze to dry. I does not take more than a minute- by the time you finish the last one, the first ones should be dry.

4.  Turn over pebbles and hot glue magnets on the back of the pebble. glass pebble magnets @ StampinFool.com

5.  Enjoy the finished magnets!! 

Glass Pebble Magnet tutorial from StampinFool.com

 

And, here is a bonus photo tutorial recap for you for easy reference. Glass Pebble Magnet Tutorial from StampinFool.com

Supply List

 

I hope you found this tutorial helpful and simple to follow. I really enjoy making these magnets and I know you will too.

I will leave you with a few tips on pricing as well as storage.
I store the completed magnets on cookie trays as they are magnetic and I can move the magnets around as they sell. The benefit of the trays is that they lay flat for long term storage but you can still prop them upright and the magnets do not fall off while you are selling them. I priced them at $1 for selling at craft fairs.
Here is the cost breakdown:
– Magnets $7 for 50
– Mini glue gun $2
– Glue sticks $2
– Diamond Glaze ($7, but i already had this)
– Stampin’ Up!’s Petal Garden Patterned Paper – $10 for 48 sheets
– Pebbles $2 for 60ish (two bags)

So, that comes to roughly $30 (assuming you didn’t have any of the materials) divided by 50 pieces (# of magnets in pack), equals $0.60 per piece. Sold at a dollar a piece that’s almost double the profit on each magnet sold. And next time you make them, the only materials cost you will have will be the magnets and pebbles, making the profit margin even higher. This is a great product guaranteed to sell out.

Glass Pebble Magenet tutorial by StampinFool.com

SaveSave

SaveSave

SaveSaveSaveSave

THE NEW STAMPIN’ TRIMMER

Image

Introducing the new and improved Stampin’ Trimmer! Although paper trimmers are a common crafting tool, this trimmer was designed exclusively by paper crafters for paper crafters-and because it was made by Stampin’ Up!, you know it’s a cut above the rest!

Features of the All-New Stampin’ Trimmer

  • An extra-wide 6-1/4″ cutting base and an extended 14-1/2″ ruler
    • The extra-wide cutting base provides a large work area and is marked in 1/4″ (4 mm) increments, allowing for small measurements.
    • The right-side grid helps you measure and cut very thin strips.
    • The extended cutting arm has a stabilizing leg to provide a sturdy and steady cutting surface for longer cuts.
    • When fully extended, the extended cutting arm sits flush with the trimmer base, providing more accurate and consistent measurements across the entire surface.
    • The cutting base and track include a full ruler, incorporating measurements down to 1/16″ and grid lines that mark each quarter inch.
    • All rulers and measurements on the base are printed under a plastic cover so your measurements won’t wear off.
    • The base has nonskid feet, which keeps the Stampin’ Trimmer securely in place on your work area.
  • A full 12″ cutting and scoring track
    • The extra-long cutting track has space at the top and bottom so you don’t have to take the cutting and scoring blades out when you’re not using them.
    • The track gives you enough space to cut or score a full 12″ (30.5 cm) without having to remove or switch out handles.
    • The cutting track locks in place for secure storage or transport.
    • The track includes an insertion point for cutting and scoring blade handles so you can easily insert handles into the cutting track.
  • Specially designed handles and cutting track to ensure straight cuts
    • The hook on the scoring and cutting blade handles keeps the handles stable so the cuts are as straight as possible.
    • Handles come in two colors: dark for cutting, light for scoring.
    • The precision tip on the cutting blade allows you to pinpoint precisely where you’re cutting.
    • The point on the side of each handle shows you where the blade will cut, making it easy to see exactly where your cuts and scores will begin.
  • Storage compartment under base
    • The storage compartment holds scoring and cutting tools such as a Bone Folder, Simply Scored Stylus, extra scoring and cutting blades, and even business cards.
    • Separate compartments within the storage compartment keep your tools organized, and the clear cover makes it easy to see what you’ve stored.
  • Product details: item 126889; $29.95

Image

Subscribe to my Newsletter & receive a FREE Gift Card Holder PDF Tutorial

Receive a FREE Gift Card Holder Tutorial

%d bloggers like this: